Neues Modell Ducati Motorrad Ladegerät tecMATE
AUTOMATISCHES BATTERIELADEGERÄT FÜR 12V BLEI-SÄURE-BATTERIEN MIT 2AH - 30AH.

NICHT GEEIGNET FÜR NICD-, NIMH-, LI-ION-BATTERIEN, D
IE NICHT NACHLADBAR SIND

Wir freuen wir uns, Ihnen  heute das
neue  Batterieladegerät,  den  DUCATI  BATTERY  CHARGER  by  tecMATE,  vorstellen  zu
können.
Das  neue  exklusive,  von  Ducati  kreierte  Design  qualifiziert  dieses  Batterieladegerät  als
Premium  Produkt  mit  italienischem  Stil.  Die  Ausführung  garantiert  das  Höchstmaß  in
Sachen Technologie und Qualität, die von einem Lieferanten erster Wahl, wie der tecMATE,
geboten werden.

Dieses  Gerät  wurde  vor  dem  Hintergrund  entwickelt,  die  Lebensdauer  der  Blei-SäureBatterien zu verlängern.
Tatsache  ist,  dass  sich  die  Batterie  in  den  Zeiten  der  seltenen  Nutzung  des  Motorrads  in
progressiver  Weise  entlädt,  was  die  Gefahr  in  sich  birgt,  dass  ihre  Funktionalität  dadurch
beeinträchtigt  wird.  Doch  wenn  Sie  den  Ducati  Battery  Charger  verwenden,  können  Sie
gewährleisten,  dass  Ihre  Ducati  jederzeit,  auch  nach  längeren  Stillstandzeiten,  zum
Durchstarten bereit ist.
Dieses Batterieladegerät funktioniert auf Basis eines vollkommen automatisch ablaufenden
Algorithmus,  der  von  einem  Mikroprozessor  gesteuert  wird.  Nachdem  die  Batterie  als
vollkommen  geladen  resultiert,  reduziert  sich  die  Spannung  auf  das  Erhaltungsniveau  der
Ladung.  Sollte  der  Verbrauch  der  elektronischen,  am  Motorrad  verbauten  Komponenten
dazu führen, dass die Batteriespannung unter das optimale Niveau sinkt, schaltet das Gerät
automatisch in den Lademodus, so dass die korrekte Spannung wieder hergestellt wird.
Das mit der Zulassung seitens der Abteilung R&D Ducati entwickelte Batterieladegerät ist
für  alle  unsere  Modelle,  sowohl  der  älteren  Jahrgänge  als  auch  der  heutigen  Produktion,
geeignet.  Insbesondere  bei  den  neuen  Ducati  Modellen  kann  dieses  Batterieladegerät
schneller  und  einfacher,  und  zwar  direkt  an  den  DDA-Anschluss  (Ducati  Data  Acquisition)
angeschlossen werden.
Der neue Ducati  Battery Charger kann jedoch auch an Modelle angeschlossen werden, die
über  keinen  DDA-Anschluss  verfügen.  Dazu  braucht  das  entsprechende  Kabel,  unter
Einhaltung  der  korrekten  Polaritäten,  nur  an  die  Ösen  der  Motorradbatterie  geklemmt
werden.

NEW DUCATI BATTERY CHARGER by tecMATE original
AUTOMATIC BATTERY CHARGER FOR 12V 2AH - 30AH LEAD-ACID BATTERIES

NOT SUITABLE FOR NON-RECHARGEABLE NICD, NIMH, LI-ION BATTERIES

In an effort to offer increasingly higher quality products able to generate higher profitability for your Dealership, enhance customer loyalty and offer new Ducati products, we are glad to introduce the new DUCATI BATTERY CHARGER by tecMATE.
The new exclusive design by Ducati turns this new battery charger into an Italian-style Premium product. Construction relies on cutting-edge technology and quality, and manufacturing is care of a top-class supplier like tecMATE.

This device was designed to increase the useful life of lead-acid batteries.
When the motorcycle is not used frequently, the battery progressively discharges and this could jeopardise its operation. Thanks to Ducati Battery Charger you can ensure that your Ducati will be ready to start at any time, even after a long period of inactivity.
The battery charger operates according to a fully automatic microprocessor-controlled algorithm. Once battery is fully charged, voltage decreases to maintenance level. If any electronic accessories of the motorcycle should make battery voltage decrease below optimum charge, the equipment will automatically switch back to charging mode in order to restore proper voltage level.
The battery charger was developed with the approval of Ducati R&D and is suitable for all our past and existing models. For the new Ducati models, connection will be faster and more convenient as the battery charger can be connected directly to the DDA (Ducati Data Acquisition) socket.
The new Ducati Battery Charger can also be used on models not equipped with DDA socket, just connect the cable with eyelets to the bike battery, properly matching the poles.
The Ducati Battery Charger will be available in the various country versions, with the following part numbers:
69928471A (EU)
69928471AY (UK)
69928471AZ (US)
69928471AW (JP)
69928471AX (AU-NZ-CN)

 

 

 

 

 

 

 

 

 

 

NEW DUCATI BATTERY CHARGER by tecMATE original
AUTOMATIC BATTERY CHARGER FOR 12V 2AH - 30AH LEAD-ACID BATTERIES

NOT SUITABLE FOR NON-RECHARGEABLE NICD, NIMH, LI-ION BATTERIES

In an effort to offer increasingly higher quality products able to generate higher profitability for your Dealership, enhance customer loyalty and offer new Ducati products, we are glad to introduce the new DUCATI BATTERY CHARGER by tecMATE.
The new exclusive design by Ducati turns this new battery charger into an Italian-style Premium product. Construction relies on cutting-edge technology and quality, and manufacturing is care of a top-class supplier like tecMATE.

This device was designed to increase the useful life of lead-acid batteries.
When the motorcycle is not used frequently, the battery progressively discharges and this could jeopardise its operation. Thanks to Ducati Battery Charger you can ensure that your Ducati will be ready to start at any time, even after a long period of inactivity.
The battery charger operates according to a fully automatic microprocessor-controlled algorithm. Once battery is fully charged, voltage decreases to maintenance level. If any electronic accessories of the motorcycle should make battery voltage decrease below optimum charge, the equipment will automatically switch back to charging mode in order to restore proper voltage level.
The battery charger was developed with the approval of Ducati R&D and is suitable for all our past and existing models. For the new Ducati models, connection will be faster and more convenient as the battery charger can be connected directly to the DDA (Ducati Data Acquisition) socket.
The new Ducati Battery Charger can also be used on models not equipped with DDA socket, just connect the cable with eyelets to the bike battery, properly matching the poles.
The Ducati Battery Charger will be available in the various country versions, with the following part numbers:
 69928471A (EU)
 69928471AY (UK)
 69928471AZ (US)
 69928471AW (JP)
 69928471AX (AU-NZ-CN)